LCD, DLP and L-COS digital projectors
produce large amounts of heat during their operation. This heat must be
channeled away from the projector to prevent overheating and projector
malfunction. It is especially important for the life of the projector lamp that
this heat is removed effectively since projector overheating is the primary
cause of projector lamp failure.
Why
do you need to clean your projector filters?
To remove the build up of excess
heat, digital projectors have one or more fans which force air around the
projector’s operating parts. Since the air contains dust and other particles,
the air must be filtered before it cools the projector to prevent the build up
of dust on the projector’s moving parts. If this were to happen, the build up
of dust would actually insulate the projector and keep heat inside the
projector unit which could be very damaging, especially to the projector lamp.
Also, dust can get on to the LCD panels and the projector lens, reducing the
quality of the displayed image or interfering with the colour of the image
projected.
As a consequence, all projectors
have filters, which is inevitably where all the dust particles removed from the
air end up. To ensure that these filters keep performing well, they must be
maintained regularly. This is very important since damage to the projector
caused by dirty filters may not be covered by the projector warranty.
How
often should I clean my projector filters?
How often you clean your projector’s
filters will depend on the environment in which the projector filters are
working. An environment that has minimal dust will mean that the filters will
not need to be cleaned as often as an environment with lots of dust, such as in
a classroom where chalk dust can be a problem.
Generally, projector manuals
recommend that cleaning the filters once every 100 to 300 hours is usually
acceptable, but you should check your projector’s manual to find out what the
recommended filter cleaning cycle specific to your projector is. Remember that
you should also clean or replace your filters whenever you notice an excessive
build up of dust.
FOR NEXT INFORMATION..PLEASE VISIT US TO:
Jaya Plaza,
Jl. Ahmad Yani No. 238 Blok R-5 Bandung 40271 TELP: 022-87245883/72232572,
FAX : 87245883
www.visualprojekbandung.com
Jl. Ahmad Yani No. 238 Blok R-5 Bandung 40271 TELP: 022-87245883/72232572,
FAX : 87245883
www.visualprojekbandung.com
Hp : 082119733308/022-21206869
BANDUNG, SUMEDANG, GARUT, TASIKMALAYA, CIANJUR, PURWAKARTA, SUKABUMI, BEKASI, PADALARANG, CIMAHI,
Tidak ada komentar:
Posting Komentar